Blog Post by Bridger Photonics Team
Bridger Photonics’ Comments on Canada’s Oil and Gas Discussion Paper
In March 2022, Environment and Climate Change Canada (ECCC) published a discussion paper ...
Start Reading
How Much Emissions Could Gas Mapping LiDAR™ Reduce Using EPA’s New Rule?
Emissions Reduction Potential: EPA’s Site-Level Emissions Estimates Compared to ...
Start Reading
Bridger Photonics Releases Second Generation of Methane Detection Sensor, Gas Mapping LiDAR 2.0
Our world-class technical team has been quietly working on something very exciting… the ...
Start Reading
Gas Mapping LiDAR Methane Detection for Distribution Utilities
Case Study: Nations Largest Distribution Utility Uses Gas Mapping LiDAR to Detect Methane ...
Start Reading
Gas Mapping LiDAR gains regulatory approval for ALARM use in New Mexico
Airborne laser methane detection gains regulatory approval for “advanced technology” ...
Start Reading
Devon Energy to Use Aerial Gas Mapping LiDAR to Track Down Methane Emissions Across Full Portfolio
Bozeman, MT, February 07, 2022 – Bridger Photonics (Bridger), creator of laser-based ...
Start Reading
Bridger Photonics’ Comments on the EPA’s Proposed Methane Rule
The EPA recently released a new proposed rule for methane emissions reduction in oil and ...
Start Reading
What Methane Detection Sensitivity Is Needed for Meaningful Emissions Reduction?
Sensitivity Part ll: Breaking Down the Percent of Emissions Detected at Different ...
Start Reading
Understanding Certified Gas - A Q&A with Georges Tijbosch of MiQ
Learning about MiQ's Methane Mission with CEO, Georges Tijbosch Natural gas certification ...
Start Reading
Methane Leak Monitoring Requirements in the New PHMSA Rule
Back in the olden days of 2020, rural natural gas gathering pipelines were like the wild ...
Start Reading